Step 1: Pre-Inspection Every great carpet cleaning experience starts with a proper pre-inspection. Our service technician will inspect your particular areas of concern as well as noting carpet construction and soiling conditions. He will also advise you of any possible permanent staining.

Step 2: – Commercial Pre-Vacuum Your carpet will be thoroughly vacuumed with a Commercial Grade Vacuum to remove bonded dry soil. Dry soil is removed by a thorough vacuuming. Removing dry soil is one of the most important steps in cleaning.

Step 3: – Furniture Moving Sofas, chairs and tables will be carefully moved. Larger pieces, beds and dressers are left in place under our regular pricing structure.

Step 4: – Pre-Spray & Pre-Spot To Entire surface area is sprayed and special detail Traffic areas and spots are pretreated with a hot organic pre-spray for more effective soil and spot removal.

Step 5 – Restorative Rotary Scrub We use a rotary machine with a carpet brush to scrub down to the base of each fiber. This ensures that all soils and contaminates are released to be extracted in the next step.

Step 6 – Extract & Rinse ROTOVAC Once the soil has been loosened, our state-of-the-art Extraction equipment with ROTOVAC will thoroughly flush the carpet pile with an organic rinsing agent. Pressure and heat are regulated so that carpet is not over-wet. We clean with water temperature between 180°F – 190°F.

Step 7 – Post Spot Treatment If any spots are not removed during the cleaning process, specialty spotting techniques are employed. Note: Permanent stains identified by our service technician may not be removed.

Step 8 – Speed Dry A high powered blower is used to speed up the drying process.